Gateway Notebook Reference Manual page 107

www.gateway.com
•
Check the port and cable for bent or broken pins.
•
If the printer you want to print to is not the default
printer, make sure that you have selected it in the
printer setup.
To set a default printer:
1
Click
Control Panel window opens.
2
Click Hardware and Sound.
3
Click the Printers.
4
Right-click the name of the printer you want to be
the default printer, then click Set as Default
Printer.
•
Reinstall the printer driver. See the guide that came with
your printer for instructions on installing the printer
driver.
You see a "Printer queue is full" error message
•
Make sure that the printer is not set to work offline.
To make sure that the printer is not set to work offline:
1
Click
Control Panel window opens.
2
Click Hardware and Sound.
3
Click Printers.
4
If the printer status is Offline, right-click the name
of the printer you want to use, then click Use
Printer Online to set the printer to work online.
•
Wait until files have been printed before sending
additional files to the printer.
•
If you print large files or many files at one time, you
may want to add additional memory to the printer. See
the printer documentation for instructions for adding
additional memory.
You see a "Printer is out of paper" error message
After adding paper, make sure that the printer is online. Most
printers have an online/offline button that you need to press
after adding paper.
(Start), then click Control Panel. The
(Start), then click Control Panel. The
101