Tripped Sensor Indication - Honda ACCORD 08E51-SDA-100 Owner's Manual

Tripped Sensor Warning and Indication

Tripped Sensor Indication

1
2
3
4
TRIPPED STATUS LED
SENSOR NUMBER OF FLASHES
Door 1
Trunk 2
Ignition Key Switch
Ignition Switch 3
Battery Disconnected
Glass Breakage 4
Hood 5
18
• After disarming the system, if the tripped sensor warning indicator appears, you can
identify which portion of the security system has been tripped by observing the
number of flashes as shown below.
• Information regarding the security system can be retrieved from the memory of the
systems main control unit.
Disarm the security system.
Close the door.
Insert the ignition key.
Within 1 second after step 2, open the door.
Within 1 second after step 3, remove the key from the ignition switch.
The status LED flashes to indicate which sensor(s) were tripped.
Example 1:
If opening the trunk causes the alarm to be triggered, the Status LED will flash two
times, pause and repeat this sequence for 1 minute.
Example 2:
If the alarm is triggered twice, first by opening the door and then by opening the trunk,
the Status LED will flash once, pause, flash two times, pause and repeat this sequence
for 1 minute.
© 2002 American Honda Motor Co., Inc. - All Rights Reserved.