Remote Control Code Programming; How To Program Remote Control Transmitters - Honda ACCORD 08E51-SDA-100 Owner's Manual

Remote Control Code Programming (Only vehicles not equipped with Standard Keyless Entry System)
How to Program Remote
Control Transmitters
3
20
• For steps 2 thru 12, each step must be completed within 5 seconds. Step 13 must be
completed within 10 seconds for each remote.
• Up to three remotes can be stored in memory.
• All remotes to be programmed must be on hand.
• A non-programmed remote will work for this procedure.
• Turn the ignition key to the LOCK (0) position to complete the programming procedure.
1
2
ON
LOCK
3
or
4
ON
LOCK
5
ON
LOCK
Disarm the security system.
Turn the ignition key to the ON (II)
position.
Press the LOCK or UNLOCK button on
the remote control transmitter.
Turn the ignition key to the LOCK (0)
position.
Turn the ignition key to the ON (II)
position.
© 2002 American Honda Motor Co., Inc. - All Rights Reserved.