Table of Contents
Advertisement
Connections & Controls
Front Panel
1. Menu Button - Calls up the menu display which is navigated using buttons 6 & 7.
2. Display Panel - Displays the status and set up of the DN-200 unit or if the Menu
Button is pressed the DN-200 Menu options.
3. Play / Pause Button - Starts playback of a track, or pauses playback of a track with
the current status shown on the Display Panel. Also Starts / Pauses a recording when
the unit is in Record mode.
4. Stop Button - Stops playback or record.
5. Record Button - Puts the DN-200 into Record Mode. To start recording press the
Record Button and the Play Button simultaneously. The unit will not record if no
video signal is present.
6. Navigation Button – Used to navigate the menus and confirm set up choices.
7. Navigation Button – Used to navigate the menus and confirm set up choices.
DN-200 Clip Status Display Explained
1. Sync to Tape Indicator OFF=ST0 and ON=ST1
2. Analogue / Digital Source indicator
3. Loop Playback indicator
4. Remaining Recording Space in Hours and Minutes
5. Current Bin and Clip
6. File type indicator
7. Current Time Code or total length of clip
8. Menu options
9. Record, Pause, FFWD, REV and Playback indication
7
Advertisement
Table of Contents
