Eas; Eas Deactivation Antenna - Honeywell Horizon 7600 Installation And User Manual

EAS

EAS Deactivation Antenna

SW1 and SW2 are the switch banks inside the Checkpoint Device that set the
deactivation range. Honeywell recommends end users program the 7600 to the
Fixed Low-Density depth of field, so that the unit does not scan out beyond the
deactivation range.
CheckPoint Recommended
Unit #
MS7620 1, 2, 3, 4, 5, on SW1 & SW2
MS7625 1, 2, 3, 4, 5, on SW1 & SW2
*Note: Minimum element width changes to 6.8 mil when in this mode.
EAS Cable
Connector
Contact Checkpoint Systems directly for additional EAS support.
Switch Bank Settings
Figure 24: EAS Cable and Connector
7600 Depth of Field
Settings
Fixed Low Density*
Fixed Low Density*
EAS Cable
52-52511A
PN
23