Eas Deactivation - Honeywell MS3780 Fusion User Manual

I
NSTALLATION

EAS Deactivation

SW1 and SW2 are the switch banks inside the Checkpoint Device that set the
deactivation range. The following is a list of Checkpoint recommended switch
bank settings.
Switch 1 and 6
Switch 2, 3, 4, and 5
Checkpoint Recommended Switch Bank Settings
Switch 1
Switch 2, 3, 4, 5, and 6
All Fusion models equipped with EAS capabilities have an EAS designation in
their model numbers. The cable supplied with these units will have additional
wires for connection to the Checkpoint Device.
Figure 13 shows the location of the EAS
deactivation area for Fusion.
It is important to pass the entire tag through
this area to deactivate the security tag.
12
Checkpoint Recommended Switch Bank Settings
For RS232 and IBM
SW1
ON
OFF
SW1
ON
OFF
Figure 12. EAS Cable
Switch 1 and 6
Switch 2, 3, 4, and 5
For USB
Switch 1
Switch 2, 3, 4, 5, and 6
Figure 13. EAS Deactivation Area
SW2
ON
OFF
SW2
ON
OFF