Basic Operation - Hitachi 42PD380TA-P1 User Manual

Basic Operation

Channel selection
With the 10 number buttons.
Example:
• CH 2: Press 0, 0, 2 continuously. The station
stored in the position 2 will appear.
• CH 29: Press 0, 2, 9 continuously. The station
stored in the position 29 will appear.
• CH 107: Press 1, 0, 7 continuously. The station
stored in the position 107 will appear.
Note:
If the built-in tuner does not receive
anything (e.g. if no antenna is con-
nected) during TV-operation, then the
TV-unit will change to standby after
approx. 15 minutes.
3U81641A [E] P18-24
42PD380TA-P1
QuickView
QUICK VIEW button allows you to go back to the last selected
channel.
Volume adjusting
Press
disappears after 4 seconds.
MUTE
Press MUTE. The sound will be cut off. MUTE will appear for
approx. 4 seconds.
The muting can be released by pressing MUTE again or
.
RECALL
Press RECALL.
Channel number
and wide screen
type will appear.
The display will
disappear after 4
seconds.
STATUS
Press STATUS. The clock and a program information will appear
approx. 2 seconds later, if the station supported.
SLEEP TIMER
Press SLEEP.
SLEEP and the
minutes until the
shut-off will
appear. Each time
you press SLEEP
the number near
SLEEP will
change.
When the displayed time runs out, the unit will switch to
standby. The display will disappear after approx. 4 seconds.
To cancel the sleep timer:
Press SLEEP repeatedly until "0" appears.
HITACHI
23
Press or to change to the program
forward or backward. The changing takes approx. 2
seconds. If the auto search stored only 5 stations,
these only 5 also will appear. Still uncovered or
hidden store position will not appear
or to adjust the volume. The volume level
9/16/05, 7:26 PM
.
39
or
23