Automatic Station Presetting With The Built-In Tuner - Hitachi 42PD380TA-P1 User Manual

Automatic station presetting with the built-in Tuner

Your television has an Automatic Tuning System which makes tuning in your television easy. This
Automatic Tuning System scans the entire reception range in your area and automatically stores
all available channels of suitable signal strength in the correct order. Please note that the Auto
tuning facility can only search for analogue signals - if you have any digital decoders connected,
please refer to their instructions for details of how to set them up.
Note:
If you receive a signal of NTSC4.43 from
ANT IN (e.g. connect with your VCR) and
then tuning with AUTO TUNING, its color
and sound may not come out. But it is
not a failure.
In case you tune to the NTSC4.43-
signal, perform MANUAL TUNING on
P.22 setting color system on step 2 as
20
"NTSC4.43".
20
3U81641A [E] P18-24
42PD380TA-P1
Preparation:
Connect a antenna or a cable-net.
Do not connect any other unit or cable.
To avoid every reception disturbance, all connected unit must
be turned off and power supply is disconnected.
Press 1-button. CH1 will appear.
1
Select AUTO TUNING.
2
Then press
The broadcast-searcher searches the broadcasts and
stores them in order. During the search the sound is
muted.
When all programs have been stored, the AUTO TUNING
menu will appear automatically.
HITACHI
20
A U T O T U N I N G
M A N U A L T U N I N G
S O R T
T E X T L A N G U A G E W E S T
L A N G U A G E E N G L I S H
V E R T I C A L P O S I T I O N
: S E L E C T : A D J U S T
M E N U : R E T U R N
.
P A L
MENU : RETURN
9/16/05, 7:26 PM
C H 1