Location Of Controls - Hitachi 42PD380TA-P1 User Manual

Location of controls

Left Side
Description of Indicators and Controls
1. Main Power Switch: To turn the unit on or off completely.
2. PROGRAM ▲/▼ -Buttons: Press ▲ to change to a higher numbered channel set into memory.
Press ▼ to change to a lower numbered channel set into memory. In Menu : Setting. In Standby :
Turning on the unit.
(Volume) ▲/▼ -Buttons : To adjust the volume. In Menu : Setting. To display the menu-
3.
screen, press these buttons simultaneously for more than one second.
4. INPUT-Button: Select input mode for TV/AV/HDMI/PC.
5. (SUB-POWER) button: To turn the unit standby mode on and off.
6. STANDBY/ON indicator: It lights up in red at STANDBY, and in green at POWER ON.
7. Remote sensor
8. Loudspeakers
9. HEADPHONES jack: Plug headphones with a mini plug (3.5 mm) into this jack.
10. AV3-Input: Input for analogue A/V-Signal (Composite). If your equipment has an S-video connector,
use an S-video cable instead of a standard yellow video cable (You still must connect the standard
red and white audio cables for full system connection, but do not connect a standard yellow video
cable at the same time or the picture performance will be unacceptable.)
3U81641A [E] P09-12
42PD380TA-P1
Front Side
9
10
8 1
HITACHI
9
2 4 5
3
9/16/05, 7:25 PM
6 7
8
9