Hitachi 42PD380TA-P1 User Manual page 16

Connections to other equipment
To connect the Plasma Display to a DVD player/Satellite receiver
If your DVD player or Satellite receiver has a S-Video out jack, connect cords as shown.
Rear lower of the Plasma Display
To AUDIO
IN 1 (or 2)
To connect the Plasma Display to a DVD player with component video
If your DVD player has component video out jacks, connect your Plasma Display to a DVD player using a
component video cord. It can greatly enhance picture quality and performance.
Rear lower of the Plasma Display
To COMPONENT-1
NOTE:
Component Video input of this unit are for use of device which output interlaced signals (PAL: 576i/1080i
or NTSC: 480i/1080i) and progressive signals (PAL: 576p/720p or NTSC: 480p/720p).
14
3U81641A [E] P13-17
42PD380TA-P1
To S-VIDEO IN 1 (or 2)
S-Video cord (not supplied)
Audio cord (not supplied)
(or 2)
Audio cord (not supplied)
Video cord (not supplied)
HITACHI
14
To S-Video OUT
To Audio OUT
To Audio OUT
To Component OUT
9/16/05, 7:26 PM