Brightness, Contrast, Color And Sharpness; Dnr - Hitachi 42PD380TA-P1 User Manual

Brightness, Contrast, Color and Sharpness/DNR
Notes:
• To centralize these picture adjust-
ments, press NORMAL in step 1.
• TINT changes something only when a
NTSC-3.58MHz signal is played back
through an AV input.
• In HDMI or COMPONENT mode, the
"DNR"-option can not be selected.
3U81641A [E] P25-31
42PD380TA-P1
Brightness, Contrast, Colour and Sharpness
1
Select BRIGHTNESS. Then press
brightness.
If you wish to set the contrast, color, tint, or sharpness,
press
COLOR, TINT, or SHARPNESS.
The menu "TINT" can be selected at AV-Playback, if a
NTSC 3.58MHz signal comes in through a AV socket and
NTSC or AUTO was selected at COLOR SYSTEM
2
Press MENU repeatedly until the MENU disappears.

DNR

DNR (Digital Noise Reduction) can reduce the roughness of
the picture.
1
Select DNR. Then press
OFF.
2
Press MENU repeatedly until the MENU disappears.
HITACHI
29
or
or to select CONTRAST,
or to select ON or
9/16/05, 7:26 PM
to adjust the
.
40
29