Grecom PSR-410 Owner's Manual page 91

Freq
Tag
Sq Mode
Squelch Code
L/Out
Priority
LED Mode
LED Color
Latch LED
Any supported
f r e q u e n c y i n
MHz
Alpha-numeric
text
S e a r c h , N o n e ,
CTCSS, DCS
Search, CTCSS
tone, DCS Code,
n/a
On or Off
On or Off
Solid or Flash
0-7
On or Off
The frequency that the CONV object
will use.
The alphanumeric display name for
the CONV channel. Use the standard
text entry method or QTXT to name the
object.
Sets subaudible squelch mode. Use
Search to automatically analyze sig-
nals to determine squelch mode and
code. Use None to ignore subaudible
squelch. Use CTCSS for tone coded
squelch, or DCS for digital coded
squelch. Used in conjunction with
Squelch Code parameter below.
Sets CTCSS tone, or DCS code de-
pending on Sq Mode setting. Use
Search to detect tone or code value for
selected squelch type.
Permanent lockout for the CONV chan-
nel. Also accessed by pressing FUNC
L/OUT while the scanner is stopped
on the CONV object.
Turns Priority Mode on or off for the
CONV object.
Controls whether the ALERT LED
flashes or remains on solid when the
ALERT LED is used.
Sets LED color to 0-7 as defined in the
GLOB menu. By default, 0=LED Off,
1=Red, 2=Yellow, 3=Green, 4=Cyan,
5=Blue, 6=Magenta, 7=White.
Normally the ALERT LED is active only
while the object is receiving a trans-
mission. When Latch is on, the ALERT
LED will remain lit after the transmis-
sion is complete, unless overridden by
a subsequent object that is also using
the ALERT LED.
91