Grecom PSR-410 Owner's Manual page 76

31 D
21 A
53 L
53 L
21 A
74 S
• <space>
23 C
63 O
82 U
62 N
81 T
93 Y
Scroll to the Alarm: field. Note that you can specify different alarm
sounds for this SAME entry. We recommend that you use the default setting
here for general purpose weather alerting.
Scroll to the Lockout: field. Note that Lockout is currently set to off.
Lockout is a special purpose parameter that can be used to lock out
individual event or area codes. We recommend that you leave Lockout set
to off for general purpose weather alerting.
When you have finished editing your SAME entry, press the Save softkey
to store the data, then press the Save softkey to save all SAME changes
and return to the Weather mode.
Activating SAME Standby Mode
After you have entered your desired SAME codes, you can activate the
SAME Standby Mode to begin standby operation. The radio will remain
silent until a SAME transmission is received with a code that matches one
that you have stored. When a matching SAME message is received, your
radio will sound a siren alarm, then will play the audio message that follows
the Warning Alert Tone (WAT).
To activate SAME standby mode, press the WX key, use the 5 or 6 keys
to find the best weather radio transmitter for your location, then press the
76