Grecom PSR-410 Owner's Manual page 102

Tag
L/Out
LED Mode
LED Color
Latch LED
Backlight
Alarm
Fav
EXPERT BELOW
Modulation
102
A l p h a - n u m e r i c
text
On or Off
Solid or Flash
0-7
On or Off
On, Off or Flash
None, Chirp, Hi-
Lo, Alert, Ring,
2-Chirp, Fast Hi-
Lo, DTMF#
Yes or No
AM, FM, Auto
The alphanumeric display name for
the SRVC search. Use the standard
text entry method or QTXT to name
the object.
Permanent lockout for the SRVC ob-
ject. Also accessed by pressing FUNC
L/OUT while the scanner is stopped
on the SRVC object.
Controls whether the ALERT LED
flashes or remains on solid when the
ALERT LED is used.
Sets LED color to 0-7 as defined in the
GLOB menu. By default, 0=LED Off,
1=Red, 2=Yellow, 3=Green, 4=Cyan,
5=Blue, 6=Magenta, 7=White.
Normally the ALERT LED is active only
while the object is receiving a trans-
mission. When Latch is on, the ALERT
LED will remain lit after the transmis-
sion is complete, unless overridden by
a subsequent object that is also using
the ALERT LED.
Controls whether the backlight should
be on, off or flashing while the object
is active.
Sets the Audible Alarm for the SRVC
object. When an Audible Alarm is
selected, the selected alarm will play
anytime the scanner stops for activity
on the SRVC object while scanning.
When Yes, the SRVC object is a mem-
ber of the Favorites Scan List.
Modulation setting for the SRVC
search. In most cases Auto will work
fine. Use AM to override and force AM
modulation, FM to force FM modula-
tion.