Grecom PSR-410 Owner's Manual page 89

Color 0-7
Qtxt1-0
Key Repeat
LCD BlinkOff
LCD BlinkOn
LED BlinkOff
LED BlinkOn
Pri Channels
Pri Interval
TGRP Pri Int
QuickPriRtn
Search Delay
Red/Green/Blue
(RGB) value
Text value
On or Off
1-250 x 10 mS
1-250 x 10 mS
1-250 x 10 mS
1-250 x 10 mS
0-250
2-100 x 100 mS
On or Off
On or Off
1-100 x 100 mS
Sets intensity of red, green and blue
LEDs. Press SEL to edit colors. Use
34 keys to scroll to R, G or B LED
settings. Use numeric keys to activate
preset intensity levels for each LED, or
use 56 keys to fine scroll intensity.
Sets QTXT (QuickText) 0-9 text. Use "$"
to indicate end of text.
Toggles key repeat mode when a key
is held down
For alternating text displays, sets the
display time for the secondary display
element.
For alternating text displays, sets the
display time for the primary display ele-
ment.
When the ALERT LED setting for an ob-
ject is set to Flash, this is the amount of
time the LED stays turned off.
When the ALERT LED setting for an ob-
ject is set to Flash, this is the amount of
time the LED stays turned on.
Number of priority CONV channels to
check during a priority scan sampling.
"0" samples all CONV priority chan-
nels.
Conventional frequency priority sample
interval.
Toggles priority interrupt scanning du-
ring trunked calls
When on, does not wait for verification
of correct CTCSS, or DCS when return-
ing to an active CONV channel after
priority sampling
Sets wait for reply delay for all search
modes
89