Grecom PSR-410 Owner's Manual page 106

Delay
Delay Time
Zeromatic
Special
Search Dir
Hit Count
106
On or Off
1-200
On or Off
On or Off
Up or Down
Numeric value
Controls whether a Delay is used to
wait for reply traffic after a transmis-
sion on the SWPR search.
Sets the amount of time (in 100 mil-
lisecond intervals) for the wait for
reply delay if Delay is On, e.g., 20=2
seconds.
When on, enhances the scanner's
ability to lock on to the actual center
frequency of a search hit instead of
an adjacent frequency.
SWPR works by quickly sweeping
the RF spectrum in 1 MHz increments
to find nearby strong signals. If the 1
MHz sweep indicates that activity is
present in the 1 MHz range, SWPR
sweeps that range to find the source.
Sets search direction used when
SWPR object is active.
Increments each time a transmission
is received on the SWPR object.
Global "Hit Counts" must be set to
ON. Press the Dflt softkey to reset
to 0.