1. When you remove the panel, turn the transceiver up side
down. Detach the panel by lifting the tabs as shown be-
low.
Tabs
Fig. 1
2. To remove the cabinet, first turn the transceiver up side
down. Detach the cabinet by prying the tabs as shown
below.
Tabs
Fig. 2
DISASSEMBLY FOR REPAIR
Tabs
3. To remove the display unit PCB, detach the PCB by lifting
at the indents of the PCB as shown below.
Fig. 3
4. When mounting the front panel, match the 4 tabs of the
chassis with the panel, being sure they attach securely.
Tabs
Fig. 4
TK-8102H
Indents
Tabs
9