Oa-512 Slot Numbering - Alcatel OmniAccess 512 Getting Started Manual

OA-512 Slot Numbering

The front panel of an OA-512 is divided into several
areas labeled S2, S3/1, S3/2, S/4, etc. Think of these
areas as a division of the switch into several modules,
or slots. The UI and CLI, accessible via the front panel
console port, rely on these slot designations for many
of their management and configuration commands.
represents Slot 1 and contains
CONSOLE
the equivalent of a management module.
The UI refers to the management module
as the .
MPM
10/100
OmniAccess
1 5 9
512
CONSOLE
OK1 TP
OK2 PS 4 8 12
1X 2X 3X 4X 5X 6X
S2
T1/E1
S3/1
STA
The OA-512's WAN uplink slot is labeled
Slot 3. This slot contains two separate uplink port
positions: and
S3/1 S3/2
uplink is shown at position
.
The Ethernet port connectors
are labeled for Slot 2.
S2
7X 8X 9X 10X 11X 12X
S3/2
for
S3
. (An OA-512-FT1/FE1
.)
S3/1
The slot reserved for the OA-512's
VoIP uplink is labeled for Slot 4.
S4
OmniAccess Basics 13
S4