Rewind Bracket Installation For Falcon 4 Plus - Century Falcon 4 Plus Series User Manual

3-2. Rewind Bracket Installation for Falcon 4 Plus

1. Face the printer front, and
unscrew the bottom cover
screw.
2. Remove the bottom front
Cover.
【 】
Note
Before the installation,
please power off the printer
first.
3. Mount the label rewind
bracket onto the printer
mechanism and secure
the screws into place.
4. Label rewind bracket
installation completes.
5. Install the media into the
printer.
6. Feed the label through
the Printer Mechanism
and around the Label
Feed Guide.
7. Wrap the label around the
Liner Rewinder Shaft,
and use the U Shape Clip
to secure the liner.
【 】
Note
Make sure the label rewind is in
correct direction.
Falcon 4 Plus/Falcon 6 Plus User's Manual 23