Windows Driver Installation - Century Hawk 4 User Manual

DIP Bit
1
2
3
4
5
6
7
8
Windows Driver and hawklabel Software
The printer driver supports Windows 2003/XP/2000/NT/ME/98/95/Vista
operating systems. Each Century Hawk printer comes with powerful bar
code software hawklabel and operating instructions. Both the Windows
driver and hawklabel are available on the manufacturer's CD-ROM
shipped with the product.
Functions
ON: Direct thermal print
OFF: Thermal transfer print
ON: Enable Back feed
OFF: Disable Back feed
ON: Cutter is installed
OFF: Cutter is not installed
ON: Peeler is installed
OFF: Peeler is not installed
ON: Transmissive Sensor
OFF: Reflective Sensor
ON: Enable IP setting
OFF: Disable IP setting
8 | 7
0 | 0 – 9600,n,8,1
0 | 1 – 19200,n,8,1
1 | 0 – 38400,n,8,1
1 | 1 – 57600,n,8,1
Printing type settings
Default: OFF
Back feed settings
Default: OFF
Cutter settings
Default: OFF
Peeler settings
Default: OFF
Select Media Sensor
Default: OFF
IP address setup
Default: OFF
RS232 Serial Port
baud rate setting
0: OFF, 1: ON
Default: 00
33
Remarks