Self-Test - Century Falcon 4 Plus Series User Manual

4-4. Self-Test

The Self-Test function will help user to check whether the printer is operating normally. In
Self-Test Mode, the printer will print out a test sample each time when the FEED key is pressed.
To break off the Self-Test procedure, please power off the printer.
Below are the Self-Test procedures:
1. Power off the printer, press and hold the FEED key.
2. Power on the printer (while still holding the FEED key); release the FEED key after hearing
3 beeps.
3. After about 1 second, printer would automatically print out the following, and the LCD
Display would show "Self Test." This means the printer is operating normally.
Model & Version
Serial port setup
Test pattern
Number of DRAM installed
Image buffer size
Number of forms
Number of graphics
Number of fonts
Number of Asian fonts
Number of Databases
Free memory size
Speed, Density, Ref. Point, Print direction
Label width, Form length
Cutter, Stripper, Mode
Gap sensor AD
Code Page
Keyboard Layout
Top of Form function on/off
Max. continuous printing length
Self-Test includes the internal printer data setting.
Falcon 4 Plus/Falcon 6 Plus User's Manual
FalconXXXX : VX.XXX
Serial port :96,N,8,1
1 DRAM installed
Image buffer size : 2200K
000 FORM(S) IN MEMORY
000 GRAPHIC (S) IN MEMORY
000 FONT(S) IN MEMORY
000 ASIAN FONT(S) IN MEMORY
000 DATABASE(S) IN MEMORY
769K BYTES FREE MEMORY
^S6 ^H8 ^R000 ~R200
^W100 ^Q100,3
Option : ^D0 ^O0 ^AD
Gap Sensor AD : 129 162 195 (3)
Code Page: 850
Keyboard Layout : US-International
Top of Form: ON
Print Length (m):4572
40