Maintenance And Adjustment; Print Head Module Installation / Removal Instruction - Century Falcon 4 Plus Series User Manual

5. Maintenance and Adjustment

5-1. Print Head Module Installation / Removal Instruction

1. Open the top cover.
【 】
Note
Power-off when removing
print head module.
2. Pull the Print Head
Lever out and flip it
upward to the right.
【 】
Note
When remove print head
module, please dismount
the cutter first.
3. To remove the print
head module, hold
on the front of the
print head module
and pull it out.
4. If user cannot
successfully remove
the print head by
hand, the
screwdriver can be
used for assistant as
the figure shows.
5. To install the print
head module, hold
on the front of the
print head module
and slide down
along the track.
Align the male end
(with protruding
pins) with the female
end (pin base) and
push the print head
module down.
Falcon 4 Plus/Falcon 6 Plus User's Manual
2
44