Control Panels
24.7
Service Bypass
To facilitate system maintenance for service personnel,
your security system comes with a special point bypass
option to remove any point from service. Bypassed
points are not protected. Use this menu to view
bypassed points.
Viewing points in Service Bypass:
1. Press [MENU] to open the Main menu.
2. Use [NEXT] to go to the Actions menu option, and
press [ENTER], or simply press [3].
3. Use [NEXT] to go to the Service Bypass menu
option, and press [ENTER], or simply press [6].
4. Enter your passcode and press [ENTER]. The keypad
shows any points in service bypass.
Bosch Security Systems, Inc.
Owner's Manual
B920 Actions menu | en 141
2012.12 | 03 | F.01U.265.453