Rps - Bosch B5512 Owner's Manual

Control Panels
15.3.4 Notification Test
Use this menu to test the security system's ability to
send personal notification messages to the destination
path designated by your security company.
Testing notifications:
1. Press [Menu] to open the Main menu.
2. Press [Actions] to open the Actions menu option.
3. Press [Test] to open the Test menu option.
4. Press [Notification Test] to open the Notification
Test menu option.
5. The keypad shows the first properly configured
notification path. Use [NEXT] to go to the desired
notification path, and then press [Enter]. The
control panel sends a test notification, and then
returns to idle text.
15.4

RPS

Use the RPS menu for connection to Remote
Programming Software (RPS). Your security company
uses RPS to configure and service your security system.
RPS is intended for use by professional or licensed
installers only.
15.4.1 Answer
Use the Answer option to answer the phone (pick up
the phone line) to connect to RPS.
Bosch Security Systems, Inc. Owner's Manual
B930 Actions menu | en
2012.12 | 03 | F.01U.265.453
67