Date/Time - Bosch B5512 Owner's Manual

Control Panels
17.2

Date/Time

Your security system must have the correct time and
date for scheduled events to occur at the correct times.
Use the Date/Time function to set both the time and
date. The security system uses a 12-hour AM/PM format.
If your security system is configured for automatic date/
time updates, the update might overwrite your changes.
Setting the date and time:
1. Press [Menu] to open the Main menu.
2. Press [Settings] to open the Settings menu option.
3. Press [Date/Time] to open the Date/Time menu
option.
4. Press [Set Date] to open the Set Date menu option.
5. Enter your passcode and press [Enter].
6. Enter the new date in MM/DD/YY format. If you
make a mistake, the [ESC] key acts as a backspace
key. Press [ESC] to delete the characters and then
enter the new numbers.
7. Press [Enter] to save the date. The keypad shows
Change complete and then returns to the previous
menu.
8. Press [Set Time] to open the Set Time menu option.
9. Press [Enter] to continue.
Bosch Security Systems, Inc. Owner's Manual
B930 Settings menu | en
2012.12 | 03 | F.01U.265.453
89