Filter Cleaning - Master Spas legacy whirlpool Owner's Manual

REGULAR MAINTENANCE PROCEDURES
caRe of YoUR spa coVeR
Always cover your spa when not in use. This will greatly reduce energy consumption and will cause
spa water to heat more rapidly. Water loss and chemical usage will also be reduced.
• Be sure to lock down all straps on cover after each use to prevent wind damage.
• Do not allow spa to sit uncovered in direct sunlight. This may cause damage to exposed surfaces
of spa and possible discoloration of spa fittings.
• Periodically hose off both sides of spa cover for maximum life of cover. Once a month use a vinyl
cleaner and conditioner on the vinyl portion of your cover. Rinse residue off.
• Keep cover open for 15 min. after adding chemicals to prevent off gas damage.
noTe: if YoUR spa is GoinG To be lefT empTY foR pRolonGed peRiods, do noT Replace
coVeR diRecTlY on sURface of spa. place 2"-3" blocKs beTWeen coVeR and spa. This
alloWs foR adeQUaTe VenTilaTion of coVeR and spa.
caRe of YoUR spa cabineT
Your quality Polymer Skirt simply needs to be hosed off periodically. No other maintenance is
required.
3. Remove the filters. Remember that the ECO PUR mineral filters should only be rinsed with clear
water and never soaked in a cartridge cleaner. The outer filters should be periodically rinsed and
soaked in a cartridge cleaner. Follow the instructions on the cartridge cleaner. The ECO PUR filters
should be replaced every 6 months
DO NOT DIVE.

filTeR cleaninG

NOTE: Never operate the spa without filters in place. If done, damage will
result to pumps and other components. We recommend having an extra set of
filters to install when cleaning the filters.
1. Turn power off to the spa.
2. Remove any large or floating debris from the filter area.
44