Regular Maintenance Procedures - Master Spas legacy whirlpool Owner's Manual

REGULAR MAINTENANCE PROCEDURES

note: These are maintenance procedures are the responsibility of the spa owner to perform. These
procedures are not covered by the spa warranty.
To clean jeTs
Place the jet(s) in a bucket, fully immerse in white vinegar. Let the jet(s) soak overnight and then
rinse with water. Reinstall the jet(s). It may be necessary to clean grit and deposits from the white
jet body (mounted in the spa shell) by using a small bristled brush.
DO NOT DIVE.
cleaninG jeTs
The majority of jets in your spa can individually be turned on/off.
If any of these jets become hard to turn, it will be necessary to
remove the jet to clean it as grit/sand and mineral deposit may be
present.
jets are removed by turning the collar and then pulling out the jet.
The jets in your spa can be removed for cleaning by unscrewing
them (counter clockwise) and then pulling out the jet. Some jets
may not be removable depending on the model.
dRaininG YoUR spa
The drain is located behind the front panel on the far right side, grasp
the hose bib cap and turn it counter clockwise. Attach a garden hose,
if desired. Turn the black knob on the side of the valve a quarter turn.
Draining times may vary by model using the external hose bib.
A sump pump may also be used to drain the spa quickly.
43