System Related Messages - Master Spas legacy whirlpool Owner's Manual

System-Related Messages
system-related messages
memory Failure - CheCksum error*
At Power-Up, the system has failed the Program Checksum Test. This indicates a problem with the
firmware (operation program) and requires a service call.
memory WarNiNg - PersisteNt memory reset*
Appears after any system setup change. Contact your dealer or service organization if this message
appears on more than one power-up, or if it appears after the system has been running normally
for a period of time.
memory Failure - CloCk error*
Contact your dealer or service organization.
CoNFiguratioN error – sPa Will Not start uP
Contact your dealer or service organization.
a PumP aPPears to be stuCk oN
Water may be overheated. POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact your
dealer or service organization.
a PumP aPPears to have beeN stuCk oN WheN sPa Was last
PoWered – m035
POWER DOWN THE SPA. DO NOT ENTER THE WATER. Contact your dealer or service organization.
* This message can be reset from the topside panel with any button press.
DO NOT DIVE.
DO NOT DIVE.
29
37