Sensor-Related Messages
sensor-related messages
seNsor balaNCe is Poor
The temperature sensors MAY be out of sync by 2°F or 3°F. Call for Service.
seNsor balaNCe is Poor*
The temperature sensors are out of sync. The Sensor Balance is poor fault has been established for
at least 1 hour. Call for Service.
seNsor Failure – seNsor a, seNsor b
A temperature sensor or sensor circuit has failed. Call for Service.
Miscellaneous Messages
No CommuNiCatioNs
The control panel is not receiving communication from the System. Call for Service.
°F or °C is rePlaCed by °t
The Control System is in Test Mode. Call for Service.
* This message can be reset from the topside panel with any button press.
DO NOT DIVE.
DO NOT DIVE.
29
36