Flip (Invert Display); Adjusting Filtration - Master Spas legacy whirlpool Owner's Manual

flip (invert display

Flip (Invert Display)

Sub-Menu Detail – FLIP (Invert Display)
Main Screen
To next item in
Main Menu
If not toggled
Note:
Some panels may have a dedicated FLIP button, which allows the user to flip the display with a
single button-press.

Adjusting Filtration

maiN FiltratioN
Filter cycles are set using a duration. Each setting can be adjusted in 1-hour increments. Filter Cycle
1 and Filter Cycle 2 (if enabled) are set to the same duration.
Main Screen
If Filter Cycle 2 is enabled, Filter 12 will appear in the LCD. If Filter is disabled, Filter 1 will appear.
Purge CyCles
In order to maintain sanitary conditions, secondary Pumps will purge water from their respective
plumbing by running briefly at the beginning of each filter cycle.
DO NOT DIVE.
DO NOT DIVE.
Several Seconds
Toggle the inversion of the segmented characters
Pressing Light when the display is toggled will go to Main Screen.
Sets Filter length in hours
Key
Indicates Flashing or Changing Segment
Indicates Alternating or Progressive Message - every 1/2 second
A temperature button, used for "Action"
Light or dedicated "Choose" button, depending on control panel configuration
Waiting time that keeps the last change to a menu item.
*****
Waiting time (depends on menu item) that reverts to original setting and
ignores any change to that menu item.
While the Temperature is
still flashing, press Light
repeatedly until FLIP
appears in the LCD.
Main Screen
or
While the Temperature is
still flashing, press Light
repeatedly until FLTR
appears in the LCD.
To Set
*****
Waiting
Several Seconds
Reverts to Original Setting
33
28
Main Screen