Spa Trouble-Shooting Guide - Master Spas legacy whirlpool Owner's Manual

SPA TROUBLE-SHOOTING GUIDE

noThinG on The spa opeRaTes-
1.) Check the control panel display for any messages. If there is a message, refer to the diag-
nostic section. There you will find the meaning of the message and what action is to be
taken.
2.) If there is no message on your control panel, check and reset the GFCI and house breaker.
If the spa does not respond, contact your local service company.
pUmp(s) do noT opeRaTe -
1.) Press the "jets" button on your control panel.
If you hear the pumps trying to operate:
A. Pump may need to be primed. See page 16.
If you do not hear anything from the pump, contact your local service company.
pooR jeT peRfoRmance
1.) Make sure pump is operating
2.) Check that the water level is adequate (up to minimum safe water level side)
3.) Make sure that the jets and air controls are open.
4.) Check for dirty filter. Clean if necessary.
DO NOT DIVE.
* The GFCI should be located in a weather proof box close to
the spa, but no closer than 5 ft.
41