Telnet Or Terminal Interface - Comtech EF Data MR-S2 Installation And Operation Manual

Digicast Media Router S2 Receiver CMR-5975 (MR-S2)
Software Upgrade
A.3

Telnet or Terminal Interface

Access the Admin Menu (Figure A-2):
a) Select for
(D) Download Image
b) At the "Image type" prompt, enter:
Redboot.
c) Enter the TFTP IP server address. Once the TFTP IP server address is
entered, the software update will begin to download.
Do NOT power the unit down during the upgrade process.
IMPORTANT
d) When the update is complete, the message "
will be displayed (Figure A-3).
e)
After the unit has been upgraded, reset the unit by selecting
' to confirm the reset.
Y'
Figure A-2. TFTP Download (via Terminal)
.
for
1 Application
Press any key to continue
A–4
Revision 1
MN-0000032
or for
2 FPGA or 3 for
"
for Reset and
(R)