Terminal Interface - Comtech EF Data MR-S2 Installation And Operation Manual

Digicast media router s2 receiver
Hide thumbs Also See for MR-S2:
Table of Contents

Advertisement

Digicast Media Router S2 Receiver CMR-5975 (MR-S2)
Device Management via User Interfaces
Power Estimate
Displays the received port input level. This level must be between -65dBm to
-25 dBm for proper operation.
Bits per Symbol
Displays the number of bits per symbol.
Corrected Bit Error Rate
Displays the corrected bit error rate coming from the tuner. Corrected data does not result in any
lost user data.
Uncorrected Bit Error Rate
Displays the uncorrected bit error rate coming from the tuner. These are bit errors that could not
be corrected and result in lost user data.
Window Adjustment
Displays the adjustment the tuner used to capture the incoming carrier.
CRC Error Rate
Displays the Cyclic Redundancy Check (CRC) error rate received over the satellite.
4.3

Terminal Interface

The Terminal Interface provides the user with a textual configuration dialog for configuring the
MR-S2. This method of configuration should be used for initial configuration of the unit; i.e.,
configuring the network parameters for the unit but not for normal operation. The Web (HTTP)
Interface is recommended for operational management.
The Terminal Interface allows the entire unit to be configured and managed, but this interface can
only be used while a serial connection is present between the MR-S2 and a PC. The screens
shown in this section are displayed via a Telnet connection.
The user must authenticate (login) before being able to access the application. After a period of
inactivity, the user's session will time out, and must log in again to resume.
The same menu information is displayed via the serial interface with some specific features only
available via this access method – these 'serial interface only' features are noted in this section.
Detailed information is provided about the menu features in Chapter 4.2 Web Interface.
Figure 4-18 shows the hierarchal structure of the Terminal Interface-based menus and the
sections in this chapter which provide figures of these submenu pages.
4-24
Revision 1
MN-0000032

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cmr-5975

Table of Contents