Configuring The Digicast Cmr-5975 Product For Snmp - Comtech EF Data MR-S2 Installation And Operation Manual

Digicast Media Router S2 Receiver CMR-5975 (MR-S2)
Configuring and Controlling the Digicast CMR‑ 5975 Media Router with SNMP
E.2

Configuring the Digicast CMR-5975 Product for SNMP

Use the information gathered in Section E.1 to enter the proper parameters into the Digicast
CMR-5975 Media Router to make it operational via the Web interface.
There are three values that must be enabled to fully utilize all of the SNMP capabilities of the
Media Router:
SNMP R/W Community: (default = private)
– The community string provided for reading and writing to the private MIB elements on
the agent.
– The value entered will not be displayed to the user when entering the information or
displaying the Web page.
SNMP R/O Community: (default = public)
– The community string provided for reading the private MIB elements on the agent.
– The value entered will not be displayed to the user when entering the information or
displaying the Web page.
SNMP Server IP Address:
– The IP address of the SNMP server where the agent directs traps,
E–2
Revision 1
MN-0000032