System; Pc System Selection - Christie LX66 38-VIV305-01 User Manual

System

System

PC System Selection

Auto
This projector automatically tunes to various types of computers
based on VGA, SVGA, XGA, SXGA or UXGA with its Multi-scan
system and Auto PC Adjustment. If Computer source is selected
in the Source Select Menu, this projector automatically detects the
signal format and tunes to project a proper image without any
additional setting. (Signal formats provided in this projector is
shown on page 72~73 )
✔
Note:
The projector may display one of the following messages.
PC Systems provided in the projector. The projector
SVGA 1
chooses a proper system and displays it.
There is no signal input from computer. Check the
-----
connection of your computer and the projector. (See
" Troubleshooting" p70)
User preset system manually adjusted in PC Adjust
Mode 1
menu. Adjustment data can be stored in Mode 1–50.
(p42~43)
*SVGA 1 and Mode 1 are examples.
Selecting PC System Manually
When the projector has difficulty in recognizing the connected
signal conforming to PC Systems provided in this projector,
several systems are displayed. Select one from them manually.
When the image is not projected properly, manual adjustment is
required. (p42~43)
1
Press the MENU button to display On-Screen Menu. Spin
the menu icons with the Control pad and press the SELECT
button when the SYSTEM icon comes right in front.
2
Move the yellow frame pointer with the Control pad to a
proper system, and then press the SELECT button.
selects system of the connected computer and video source.
PC System Menu
The system being selected.
System icon
Custom Mode
(1~50) set in the
PC Adjust Menu.
(p42, 43)
39