Christie LX66 38-VIV305-01 User Manual page 38

Input
Input 2
Move a pointer to Input 2 and press the SELECT button.
RGB
Video
Y, Pb/Cb, Pr/Cr
Input 3
Move a pointer to Input 3 and press the SELECT button.
Video
Y, Pb/Cb, Pr/Cr
S-Video
Input 4
When digital PC/AV source is connected to the Warp & Blending
board inserted into the Input 4 terminal, the following source
menu will be displayed.
When the input source is digital coming from a
RGB (PC Digital)
computer through the Input 4 (DVI) terminal,
select RGB (PC Digital)
When the input source compatible with HDCP
RGB (AV HDCP)
is coming from video equipment through the
Input 4 (DVI) terminal, select RGB (AV HDCP).
✔
Note:
Warp & Blending board is initially installed into the Input 4 terminal slot. For details
on Warp & Blending feature, refer to the enclosed operation manual.
Input 5
A source menu appears corresponding to the board module
inserted into the Input 5 terminal.
38
When the input source is analog coming
from a computer through the Input 2 (5
BNC-type: Red, Green, Blue, H. Sync. and
V. Sync.) terminal, select RGB.
When video input signal is connected to the
Input 2 (VIDEO) terminal , select Video.
When the input source is component
coming from video equipment connected
to the Input 2 (Y, Pb/Cb, Pr/Cr) terminal,
select Y, Pb/Cb, Pr/Cr.
When video input signal is connected to the
Input 3 (VIDEO) terminal, select Video.
When the input source is component
coming from video equipment connected
to the Input 3 (Y, Pb/Cb, Pr/Cr) terminal,
select Y, Pb/Cb, Pr/Cr.
When video input signal is connected to the
Input 3 (S-VIDEO) terminal, select S-Video.
Source Select Menu
Move the pointer to
RGB, Video or Y, Pb/Cb,
Pr/Cr and press the
SELECT button.
Source Select Menu
Move the pointer to
Video, Y, Pb/Cb, Pr/Cr
or S-Video and press
the SELECT button.
✔
Note:
• Input 4 and Input 5 can not be selected when no interface
board is inserted into the respective slots. (p21)
• Input 5 terminal can only accept digital signals.
• Adjusted values or selected settings in Input 4 and Input 5
return to factory default setting when the connected interface
boards are removed from those terminal slots.