6
Starting up and operation
V
CAUTION!
Follow the safety instructions in chapter
page
33.
6.1
Access to the drives (floorstand model)
6.1.1
Enabling access to the accessible drives
Figure 5: Removing the drive cover and snapping it into the HDD cover
Ê Unlock the server (1).
Ê Remove the drive cover (2).
Ê Attach the drive cover to the recesses on the HDD cover (3).
Ê Push down the HDD cover in the direction of the arrow (4).
I
Please note the following when operating with tape drives:
If the system is programmed to eject the media automatically, the
accessible drives must not be obstructed.
TX140 S2
"Important information" on
Operating Manual
59