Safety Notes - Fujitsu PRIMERGY BX900 S1 Service Supplement Manual

3

Safety notes

I
The following safety notes are also provided in the "Safety notes and
other important information" manual.
This device complies with the relevant safety regulations for data processing
equipment.
V
CAUTION!
The actions described in these instructions should only be performed by
service personnel.
Before operating the device
V
CAUTION!
During installation and before operating the device, observe the
instructions on environmental conditions for your device.
If the device is brought in from a cold environment, condensation may
form both inside and on the outside of the machine.
Wait until the device has acclimatized to room temperature and is
absolutely dry before starting it up. Material damage may be caused
to the device if this requirement is not observed.
Transport the device only in the original packaging or in packaging
that protects it from knocks and jolts.
Notes on mounting the system unit in the rack
V
CAUTION!
Because the system unit is heavy, at least two people are needed
to safely mount it in the rack.
Before lifting the system unit, remove all server blades, all power
supply units and the fan units to reduce the weight.
To lift or carry the system unit, always use the handles on the long
sides.
Never lift or carry the system unit by the handles on the front or back
of the unit.
BX900 S1
Service Supplement 11