Figure 3.5 Touchscreen Calibration; Buzzer Setting; Figure 3.6 Volume & Sounds Settings 1; Figure 3.7 Volume & Sounds Settings 2 - Advantech TPC-31 User Manual

Press "Calibration" and then click "Recalibrate" to calibrate the touch screen as
shown below. A cross will appear on the screen in the order: center point, upper-left,
lower-left, lower-right, and upper-right. Use the stylus to tap the center of the cross
until the cross moves to next location.
3.3

Buzzer Setting

TPC-31/61 panel computers provide a buzzer setting in Windows CE. This function
enables a beep when users use the touch screen. To enable/ disable this functional-
ity, open "Start" -> "Setting" -> "Control Panel" -> "Volume & Sounds" as shown in Fig-
ure 3.6.
As shown in Figure 3.7, you can enable/disable this functionality.
TPC-31/61 User Manual

Figure 3.5 Touchscreen Calibration

Figure 3.6 Volume & Sounds Settings 1
Figure 3.7 Volume & Sounds Settings 2
14