Appendix B Watchdog Timer Programming; Overview; B.1 Overview - Advantech TPC-650H User Manual

Appendix B Watchdog Timer

B.1 Overview

The TPC-650H watchdog timer can be used to monitor system software
operation and take corrective action if the software fails to function after
the programmed period. This section describes the operation of the
watchdog timer, and how to program it.
The watchdog timer is built into the super I/O controller W83627HF. It
provides the following functions for user programming:
• Can be enabled and disabled by user's program.
• Timer can be set from 1 to 255 seconds or 1 to 255 minutes.
• Generates an interrupt or resets signal if the software fails to reset the
timer after time-out.
TPC-650H User Manual
Programming
18