GE MDS iNET 900 Reference Manual page 138

128
Unit Dimensions
Figure 4-2 shows the dimensions of the transceiver case and its
mounting holes, and Figure 4-3 on Page 131, the dimensions for
mounting with factory-supplied brackets. If possible, choose a mounting
location that provides easy access to the connectors on the end of the
radio and an unobstructed view of the LED status indicators.
TOP
FRONT
BOTTOM
THREADED
HOLES FOR
MOUNTING
SCREWS (4)
#6-32 X 1/4˝ LONG
SIDE
Not to scale
Figure 4-2. Transceiver Dimensions
iNET Series Reference Manual
6.75˝ (17.15 cm)
4.85˝ (12.32 cm)
4.25˝ (10.8 cm)
4.75˝ (12.0 cm)
1.4˝ (3.56 cm)
05-2806A01, Rev. J