Accessories - GE MDS iNET 900 Reference Manual

Mds inet series wireless ip/ethernet transceiver
Hide thumbs Also See for MDS iNET 900:
Table of Contents

Advertisement

05-2806A01, Rev. J
Table 1-3. Security Risk Management
Security Vulnerability
Unprotected access to configuration via
SNMPv1
Intrusion detection

1.6 ACCESSORIES

Table 1-4 lists common accessories and spare items for the transceiver.
GE MDS also offers an Accessories Selection Guide listing an array of
additional items that may be used with the product. Contact your factory
representative or visit
Accessory
Description
AC Power
A small power supply module designed for
Adapter Kit
continuous service. UL approved. Input:
120/220; Output: 13.8 Vdc @ 2.5 A
Omni-
Rugged antennas well suited for use at Access
Directional
Point installations. Consult with your factory
Antennas
Sales Representative for details
Yagi Antenna
Rugged antennas well suited for use at Remote
(Directional)
installations. Consult with your factory Sales
Representative for details.
TNC Male-to-N
One-piece RF adaptor plug.
Female Adapter
TNC Male-to-N
Short length of coaxial cable used to connect
Female Adapter
the radio's TNC antenna connector to a Type N
Cable
commonly used on large diameter coaxial
cables.
Ethernet RJ-45
Cable assembly used to cross-connect the
Crossover
Ethernet ports of two transceivers used in a
Cable (CAT5)
repeater configuration.
(Cable length ≈ 3 ft./1M)
2-Pin Power
Mates with power connector on transceiver.
Plug
Screw terminals provided for wires, threaded
locking screws to prevent accidental disconnect.
iNET Series Reference Manual
GE MDS Cyber Security Solution
Implement SNMPv3 secure
operation
Provides early warning via SNMP
through critical event reports
(unauthorized, logging attempts,
etc.)
Unauthorized AP MAC address
detected at Remote
Unauthorized Remote MAC
address detected at AP
Login attempt limit exceeded
(Accessed via: Telnet, HTTP, or
local)
Successful login/logout
(Accessed via: Telnet, HTTP, or
local)
to obtain a copy of the guide.
www.gemds.com
Table 1-4. Accessories
Part No.
01-3682A02
Call factory
Call factory
97-1677A161
97-1677A159
(3 ft./1m)
97-1677A160
(6 ft./1.8m)
97-1870A21
73-1194A39
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mds inet-ii 900

Table of Contents