Multi Channel Dsp Amplifier - Bosch PLENA matrix Operation Manual

PLENA matrix
Logic inputs
Connector
8CS and WCP (RS485)
Call station connector
Wall control panel connector
Amplifier
Connector
Nominal level
Impedance
Ethernet (10/100 Mbit/s)
Connector
Notice!
Maximum load means maximum two multi-channel amplifiers, call stations and wall control
panels connected.
11.1.2

Multi Channel DSP Amplifier

Power supply
Mains voltage:
–
–
Power consumption (-6dB/idle/standby):
–
–
Performance
Rated outputs voltage/impedance
Rated output power per channel (continous *):
–
–
Rated output power per channel (burst *):
Bosch Security Systems B.V.
Nominal input voltage
Input voltage limits
PLM‑4P125
PLM‑4P220
PLM‑4P125
PLM‑4P220
Operation manual
Technical Data | en
2‑pole Phoenix terminal (metric)
1x RJ45
1x RJ45
2x
RJ45
1 V
<100 ohm
1x
RJ45
100 - 240 VAC ±10%, 50/60 Hz
90 - 264 VAC
254 W / 27 W / 6 W
412 W / 36 W / 6 W
100 V / 70 V / 8 ohm / 4 ohm
130 W
220 W
47
2013-06 | V1.0 |