Call Station - Bosch PLENA matrix Operation Manual

PLENA matrix
8.2

Call Station

The call station is used to make announcements in pre‑selected loudspeaker zones.
Notice!
Upon start up, the call stations will need to be identified by the processor. During this period
the LEDs will flash in a rotating sequence; once this is complete the system is ready. Allow
approx. 15 seconds before attempting an announcement.
2
3
4
5
Number Item
1 Microphone
2 Zone label
3 Zone selection
button
3 Zone selection
LED
4 PTT LED
5 PTT button
Continue with:
–
–
Bosch Security Systems B.V.
1
Description
Flexible gooseneck microphone stem with paging call activity LEDs (green).
Paper labels can be inserted behind the thin plastic cover. Paper labels can be typed
and printed out via the PC GUI software.
This section allows the user to select the zone(s) that have been previously
configured in the PC GUI Software.
1‑8 selection LED indicator (green/on = zone selected). On start up LEDs flash in a
sequence.
– Bi‑color LEDs above the PTT button indicating:
– Red: Busy. Another call-station is currently making a call/announcement.
This call-station cannot be used to make a paging call, until the current call/
announcement is finished.
– Yellow: Wait. Your paging call is attempting to start. Do not speak yet.
– Green: Ready. The call station microphone is active, you may talk.
– Press‑to‑talk (paging call) button. Keep button pushed down to continue to talk.
Pre-settings and selections, page 34
Making an announcement, page 34
3
Operation manual
Operation | en 33
2013-06 | V1.0 |