Bosch PLENA matrix Operation Manual page 20

20 en | Connections
Number Item
10 Active
11 Network
Warning!
!
The 12V DC power output (Auto Standby) connection should be only connected with
products in accordance with recommendations outlined in this manual.
Notice!
Recommended motion sensors for use with the auto standby mode are the Bosch range of
sensors.
For more information regarding Bosch security products contact your local Bosch Security
certified partner or go to www.boschsecurity.com for details.
Notice!
It is recommended that the cable used Amp Link cable is a high quality STP CAT‑5 (e) cable.
Amp Link cable distances should not exceed 5 meters per cable.
2013-06 | V1.0 |
Description
– Contact closure to activate the "Override input":
– Use the 0 VDC from the sensor above as the common.
– RJ45 Ethernet communication socket:
– Communication with the PLENA matrix GUI application.
Operation manual
PLENA matrix
Bosch Security Systems B.V.