Connections; Call Station; Wall Control Panel - Bosch PLENA matrix Operation Manual

18 en | Connections
6

Connections

–
–
–
–
6.1

Call Station

Call stations are (daisy‑chained) connected to the DSP matrix mixer with UTP type CAT‑5
cable using RJ45 connectors. The connectors are located on the rear side of the call station.
Item
Dual RS485
input/output
Notice!
If the cables are exposed; use black or white CAT‑5 cables. This makes for a better visual
look.
6.2

Wall Control Panel

Wall control panels are (daisy‑chained) connected to the DSP matrix mixer with UTP type
CAT‑5 cable using RJ45 connectors. The connectors are located on the rear of the unit.
Item
Dual RS485
input/output
Notice!
Do NOT use a RJ45 cable boot of sleeve when terminating these cables. Using such items
may result in the cables not fitting into the device or the bend radius of the UTP to be
exceeded.
2013-06 | V1.0 |
Call Station, page 18
Wall Control Panel, page 18
Multi channel DSP Amplifier, page 19
DSP Matrix Mixer, page 21
Description
Standard RJ45 socket for RS485 data communication, power supply for
the unit and single channel audio bus.
Description
Standard RJ45 socket for RS485 data communication and power supply
for the unit.
Operation manual
PLENA matrix
Bosch Security Systems B.V.