Wall Control Panel - Bosch PLENA matrix Operation Manual

PLENA matrix
8.3

Wall Control Panel

The wall control panel is used to select the input source and to adjust the audio volume level
in the pre‑selected loudspeaker zones.
1
2
Number Item
1 Volume level up/
down button
2 Volume control
LED
3 Input source
selection LED
4 Input source
label
5 Input source
selection button
Continue with:
–
–
Bosch Security Systems B.V.
Description
2 x capacitive button to control the zone audio volume level up or down.
– 8 x LED indicating the selected audio source's volume level:
– Top LED: 0dB attenuation.
– -6dB attenuation.
– -12dB attenuation.
– -18dB attenuation.
– -24dB attenuation.
– -30dB attenuation.
– -36dB attenuation.
– Bottom LED: <= -40dB attenuation.
– LEDs off: Mute.
4 x LED indicating; Line input sources (1, 2, 3 or off) or mic./line (1, 2, 3 or 4).
A paper label to identify input sources can be inserted behind the thin plastic cover.
Paper labels can be typed and printed out via the PC GUI software.
Capacitive button to toggle through the connected line input sources (1, 2, 3 or off)
or mic./line (1, 2, 3 or 4) input source.
Select the input source, page 36
Adjust the audio output volume level, page 36
3
4
5
SELECT
Operation manual
Operation | en 35
2013-06 | V1.0 |