Table of Contents
Advertisement
How to set the time or a
duration
Times are set in segments:
– For the time of day and cooking
durations, first the hours, then the
minutes.
– For the minute minder, first the
minutes, then the seconds.
^ Press OK.
Depending on the position of the
function selector, the functions ( ,
or
) will appear.
^ Highlight the function required with V
or W.
The appropriate symbol will flash for
about 15 seconds.
^ Press OK while the symbol is
flashing.
This selects the function and the left
numeric block will start to flash.
You can only set the time/duration
while the numeric block is flashing. If
you run out of time you will have to
select the function again.
^ Use V or W to enter the value
required.
^ Press OK.
The right numeric block will start to
flash.
^ Use V or W to enter the value
required.
^ Press OK.
The time/duration you have set is now
saved.
Displaying times/durations
If times/durations have been entered,
the
and
to show that these have been set.
If you are using the minute minder
cooking duration
cooking time
simultaneously, the last selected time
will be displayed.
If you have selected a cooking
duration, the time of day cannot be
displayed.
,
When the time/duration has elapsed
– the relevant symbol will flash,
– a buzzer will sound, if this option is
selected (see "Clock/timer - Altering
settings").
^ Press OK.
The buzzer will stop and the symbols in
the display will go out.
Clock/timer
or
symbols will appear
and end of
functions
,
39
Advertisement
Table of Contents
