Checking Scanner Driver Operation - Fujitsu fi-5900C Getting Started

Notes for using Adobe Acrobat
ATTENTION
When scanning a paper document and
converting the image to PDF using Adobe
Acrobat, unexpected images may be
output when:
1. Setting "Edge Shadow Removal" in
Acrobat, and setting "Digital Endorser" or
"Black Background" options in the
TWAIN driver at the same time. Letter
strings embedded in the image or the
background may be missed.
Solution 1: Set "Edge Shadow Removal"
to "OFF" or set any option other than
"Adaptive" for "Color/Grayscale" and/or
"Monochrome" under "Compression" by
selecting [File] [Create PDF] [From
Scanner] [Optimization Options] in
Acrobat.
Solution 2: Adjust the scanning density
in the TWAIN driver.
2. Setting "Adaptive" for "Color/Grayscale"
and/or "Monochrome" under
"Compression" in Acrobat and scanning
in a resolution lower than the resolution
recommended for Acrobat.
Solution: Set OPTION to something
other than "Adaptive" under
"Compression."
3. Scanning a document longer than the
double letter (11x17) or A3 size, when
setting "Overscan" in the TWAIN driver,
the scan may fail.
Solution: When scanning a double letter
(11x17) or A3 size of document, do not
set "Overscan" in TWAIN driver.
*As for detailed usage and information on
Acrobat, refer to "Create a PDF file from a
scanned document" in Acrobat Help.
Support and User registration for Adobe
ATTENTION
products
For details, refer to the technical support
information stored in the [Customer
Support] folder on Adobe Acrobat CD-
ROM. (Note that free person-to-person
support is not available for this is a
bundled product.)
12
2.4 Checking Scanner Driver
Operation
This section explains how to check the operation of the
installed scanner driver by using ScandAll PRO.
Make sure that the scanner driver is installed properly,
following the procedure below.
■ Checking the Operation of the
Scanner Driver
1. Load the document on the scanner.
For information about how to load the document, refer
to section "2.6 Loading Documents on the ADF for
Scanning" in the "fi-5900C Operator's Guide."
2. Launch ScandAll PRO.
From the [start] menu, select [All Programs]
[Fujitsu ScandAll PRO]
3. In ScandAll PRO, select [Tool] on the menu, and
then select [Preferences].
⇒
The [Setup] dialog box appears.
4. On the [Scan] tab, select a driver.
To check the operation of FUJITSU TWAIN 32, select
[TWAIN].
To check the operation of FUJITSU ISIS, select [ISIS].
5. Click the [OK] button to close the [Setup] dialog
box.
6. In ScandAll PRO, select [Scan] on the menu, and
then select [Select Scanner].
[Fujitsu ScandAll PRO].