How To Use The Scanner Driver - Fujitsu fi-5015C Operator's Manual

Image scanner

Hide thumbs Also See for fi-5015C:

Table of Contents

2.5

How to use the Scanner Driver

To scan documents with the scanner, a scanner driver and application supported by the driver are

prerequisites. This scanner is accompanied with two drivers; one is a TWAIN-compliant driver,

TWAIN Scanner Driver, and the other is an ISIS-compliant driver, ISIS Scanner Driver; and an

application named ScandAll PRO, which supports both the drivers TWAIN and ISIS.

In this section, how to use these drivers is described.

For information about how to use ScandAll PRO and how to invoke a scanner driver via ScandAll

PRO, refer to "ScandAll PRO User's Guide".

■ TWAIN Scanner Driver

TWAIN Scanner Driver is a driver for scanning documents with the scanner based on a TWAIN-

compliant application.

Usually, you can configure the scanner settings in the scanner driver's setup dialog box, invoking a

scanner driver via an application. (Depending on the application settings, this setup dialog box may

not appear.)

HINT

■ Setting Window for TWAIN Scanner Driver

You can set the TWAIN Scanner Driver on this window.

How to invoke a scanner driver varies depending on the application. For

details, refer to the manual or help of the application you use.

For information about how to invoke a driver via ScandAll PRO, refer to

"ScandAll PRO User's Guide".

fi-5015C Image Scanner Operator's Guide

Table of Contents